Industrial (Ex) components

Integrated and modular installation accessories in hazardous areas for industrial trace heating.

Raychem modular components

E-06 heat-shrink end seal kit use with BTV and QTVR heating cables.
E-19 heat-shrink end seal kit use with XTV and KTV heating cables.
E-50 heat-shrink end seal kit use with VPL heating cables.
C25-100 cold applied connection kit is designed for terminating all Raychem BTV, QTVR, XTV, KTV and VPL industrial parallel heating cables to a junction box, whilst maintaining electrical insulation of the heating cable conductors and core.
C25-21 heat-shrik connection kit is designed for terminating all Raychem BTV, QTVR, XTV, KTV and VPL industrial parallel heating cables to a junction box, whilst maintaining electrical insulation of the heating cable conductors and core.
JBU-100-E and JBU-100-L-E junction boxes are designed to connect power to up to three Raychem BTV, QTVR, XTV, KTV or VPL industrial parallel heating cables. Available as a lighted version (-L). These include a unique light module with a superbright green LED that simply plugs into the terminals, and a lens in the lid. This provides indication that power is available in the box.
SB-101 support bracket are used to fix junction boxes on pipes or cable trays.
PSE-047, PSE-090, PSE-280 and PSE-540 metal straps for pipe mounting of support brackets
IEK-25-04 and IEK-25-PIPE insulation entry kits are designed to protect cables when passing through the thermal insulation cladding. The IEK´s are suitable for all type of parallel heating cables as well as power cables.
S-19 heat-shrink in-line splice kit use with BTV heating cables.
S-21 heat-shrink in-line splice kit use with QTVR heating cables.
S-69 heat-shrink in-line splice kit use with XTV and KTV heating cables.

Raychem integrated components

JBS-100-E and JBS-100-L-E single-entry power connection junction boxes are designed to connect power to one Raychem BTV, QTVR, XTV, KTV or VPL industrial parallel heating cable.
JBM-100-E and JBM-100-L-E multiple-entry power/tee connection junction boxes are designed to connect power to up to three Raychem BTV, QTVR, XTV, KTV or VPL industrial parallel heating cable.
T-100 is an above-insulation splice or tee kit, designed for use with up to three Raychem BTV, QTVR, XTV, KTV or VPL industrial parallel heating cables.
E-100 and E-100-L-E end seals can be used with all Raychem BTV, QTVR, XTV, KTV or VPL industrial parallel heating cables.

JBS-100, JBM-100 and E-100 kits are also available as a lighted version. These include a unique light module with a superbright LED that simply plugs into the terminals, and a lens in the lid. This provides indication that power is available in the box. The core sealing boot does not require a heat gun or torch for the installation (no hot work permit necessary). The non-curing sealant (silicone free) in the boot allows easy installation and facilitates maintenance.

JBS-100, JBM-100, T-100 and E-100 are integrates the functions of both connection kits and insulation entries. The rugged stand protects the heating cable and allows for up to 100 mm (4") of thermal insulation.

PSE-047, PSE-090, PSE-280 and PSE-540 metal straps for pipe mounting of rugged stands.
JBS-SPA small pipe adaptor required for pipes ≤ 1" (DN25), applicable for JBS-100, E-100
JBM-SPA small pipe adaptor required for pipes ≤ 1" (DN25), applicable for JBM-100, T-100

C-150-E cold applied low profile power connection kit enables in line connection of Raychem industrial heating cables, BTV, QTVR, XTV and KTV, to a flexible power cable.
S-150 cold applied low profile splice for in-line connection kit fits with all Raychem industrial heating cables, BTV, QTVR, XTV and KTV.
E-150 cold applied low profile end seal is designed to fit with all Raychem industrial self-regulating heating cables, BTV, QTVR, XTV and KTV.

Klöpper-Therm modular components

CS-1G-KT cold applied connection (to a junction box, whilst maintaining electrical insulation of the heating cable conductors and core) and end seal kit use with KT heating cables.
CS-1G-HKT cold applied connection (to a junction box, whilst maintaining electrical insulation of the heating cable conductors and core) and end seal kit use with HKT heating cables.
CB-3G junction or Tee box is designed to connect power to up to three Klöpper-Therm KT or HKT industrial parallel heating cables.
BS-110 support bracket are used to fix junction boxes on pipes or cable trays.
PSE metal straps for pipe mounting of support brackets.
IS-KT and IS-HKT insulation entry kits are designed to protect KT or HKT heating cables when passing through the thermal insulation cladding.

Klöpper-Therm integrated components

CB-PSO/ASO connection box is designed to connect power to up to three Klöpper-Therm KT or HKT industrial parallel heating cables and can be combined with the following stand-off connection and end seal kits:
ASO-CS1 Connection and End Seal Kit for inserting one self-regulating heating cable by a stand-off in an EEx e junction box (stand-off and adapter M25 made of aluminium)
ASO-CS2 Connection and End Seal Kit for inserting two self-regulating heating cable by a stand-off in an EEx e junction box (stand-off and adapter M25 made of aluminium)
PSO-CS1 Connection and End Seal Kit for inserting one self-regulating heating cable by a stand-off in an EEx e junction box (stand-off and adapter M25 made of of plastic)
PSO-CS2 Connection and End Seal Kit for inserting two self-regulating heating cable by a stand-off in an EEx e junction box (stand-off and adapter M25 made of of plastic)
PSE metal straps for pipe mounting of stands.

Fixing materials

GT-66 is a 20m roll of glass tape for attaching heating cable to pipe (not for stainless-steel pipes).
GS-54 is a 16m roll of glass tape for attaching heating cable to pipe (for stainless-steel pipes).
GT-180 is a 50m roll of glass tape for attaching heating cable to pipe (for stainless-steel pipes).
ATE-180 is a 55m roll of aluminum tape for attaching heating cables and thermostat sensors to pipes and tanks (heat-transfer tape for plastic pipes).
ATE-150 is a 50m roll of aluminum tape for attaching heating cables and thermostat sensors to pipes and tanks (heat-transfer tape for plastic pipes). 

Control and monitoring

We offers a complete suite of control and monitoring products including mechanical thermostats and electronic controllers for our heat tracing systems.
AT-TS-13, AT-TS-14, RAYSTAT-EX-02, RAYSTAT-EX-04, ETS-05-L2-E